彩合网

真空干燥系统 旋转锥真空干燥系统将完成以下任务：

温和的翻滚和融合不断使湿物料接触加热的墙壁和促进容易的蒸气逸出，在真空条件下的批处理 水汽凝结来完成，溶剂回收 类似工程的干燥系统，适用于水平旋转真空干燥系统

定制设计的包装，干燥系统可包括：

水汽凝结来完成，溶剂回收 结合真空气氛中加热的容器中的水分，干燥的产品，以确保vaporizaion。 不锈钢或镍合金容器 ASME规范压力容器和夹克 真空系统和溶剂回收 加热与温度控制系统 基于PLC的过程控制的集成控制 卫生建设 固体采样 装入电池系统集成 液体此外，如果需要 电脑过程控制 数据采集硬件和编程 船舶定位系统 防尘扩展袖子的 鼓装卸机制 暖气系统 所有保罗O.神甫真空干燥器可以由各种方法加热。这些包括蒸汽，热水或流体。

基于这些液体包装的加热系统，可提供任何尺寸或类型的机。他们通常完成所有的控制和，可以撬装式或独立的要求。

可以使用各种各样的真空系统的真空和真空溶剂回收机。这些通常是基于液环泵（水，油或溶剂的密封），或者，在某些情况下，旋转叶片泵，旋转活塞泵或其它真空源。

真空系统来操作，从几英寸汞柱子托的水平。

他们可以建立过程的要求，与一个或多个precondensers，冷凝水的接收机，传送泵，密封流体循环和冷却泵（液体环体系），分离器罐，aftercondensers和任何期望的仪表和控制水平。

Vacuum Drying Systems The Rota-Cone Vacuum Drying System will accomplish the following:

Gentle tumbling and blending to continually cause wet material to contact the heated walls and to promote easy escape of vapors from the batch under vacuum Vapor condensation to accomplish solvent recovery Similar engineered Drying Systems are applied to Horizontal Rotary Vacuum Drying Systems

Custom-designed PACKAGED DRYING SYSTEMS can include:

Vapor condensation to accomplish solvent recovery Heated vessel in combination with vacuum atmosphere to ensure vaporizaion of moisture and drying of product. Stainless Steel or Nickel Alloy vessels ASME code pressure vessels and jackets Vacuum systems and solvent recovery Heating systems with temperature control Integrated controls with PLC-based process control Sanitary construction Solids sampling Load cell systems integration Liquid addition if required Computerized process control Data acquisition hardware and programming Vessel positioning system Dust tight extension sleeves Drum loading and discharging mechanisms Heating Systems All Paul O. Abbé vacuum dryers can be heated by a variety of methods. These include steam, hot water or fluids.

Packaged heating systems based on any of these fluids can be supplied for any size or type of dryer. They are normally complete with all controls and can be skid-mounted or free-standing as required.

Vacuum and Solvent RecoveryVacuum dryers can be used with a wide array of vacuum systems. These are usually based on liquid ring pumps (water, oil or solvent sealed), or, in some cases, rotary vane pumps, rotary piston pumps or other vacuum sources.

Vacuum systems are available to operate from a few inches Hg to sub torr levels.

They can be built to the process requirement, with one or more precondensers, condensate receiver, transfer pump, seal fluid circulation and cooling pumps (liquid ring systems), separator tanks, aftercondensers and any level of instrumentation and control that is desired.

正文结束！

彩合网干燥——国家高新技术企业，多项干燥设备专利单位，行业标准主起草单位；尤其在闪蒸干燥机，喷雾干燥机，真空干燥机，带式干燥机， 振动流化床，沸腾干燥机的研发制造方面有较强的优势，欢迎与我们联系！